03 Wardrobe Revit Families
1. GENERAL INFORMATION
● Set name: Wardrobe
● Version 1.2.0
● Revit version: 2019
Description
This set of Revit families is made for modeling wardrobes in Autodesk Revit.
Using the families, you can create frame systems, cabinet systems, dressers and and individual internal components according to exact dimensionss.
Suitable for interior designers and architects.
Loading and placing into the project
In order to view and download the families from the set, you can open Project with wardrobe and copy the families using the Ctrl+C key combination, and then paste them into your project Ctrl+V.
Or open the folder with family files and drag it into the project with the mouse.
The set includes families in the Furniture and Entourage categories.
2. SET STRUCTURE
Families in the “Furniture” category:
● Basket
● Corner shelf
● Crossbar
● Double sliding door
● Double swing door
● Drawer
● Glass front
● Inclined shoe rack
● Mesh basket
● Mirror
● Pantograph
● Pull-out basket
● Pull-out trouser rack
● Shelf
● Single swing door
● Standard front
● Storage cubbies
● Straight shoe rack
● Swing-door cabinet
● Triple sliding door
● Trouser rack
● Vertical panel
● Vertical round post
Families Furniture Sets in the “Furniture” category:
● Cabinet system Corner module
● Cabinet system
● Corner shelves array
● Dresser
● Frame system
● Section 1 shelf and crossbar
● Section 2 shelves and crossbars
● Section 3 shelves and dresser
● Section Shelf_Crossbar_Dresser
● Section_with cubbies
● Shelves array
● SECTION_3 LEV
The “Furniture Sets” families act as containers and combine families from the “Furniture” category.
Families of the “Entourage” category:
● Box
● Hat
● Stack
● Bag
● Travel suitcase
The families have shared parameters with the INT prefix, which can be included in schedules.
3. COMMON ELEMENTS
Common elements are elements that are frequently repeated within families.
Handles
Handles are included in families with doors. These families are:
● Double sliding door
● Double swing door
● Single swing door
● Triple sliding door
● Swing-door cabinet
● Cabinet system
And also in families with fronts:
● Pull-out trouser rack
● Drawer
● Dresser
● Section Shelf_Crossbar_Dresser
● Section 3 shelves and dresser
● SECTION_3 LEV
The required handle type can be selected from the Handle Type drop-down list. The following handle types are included in the set:
● Round knob
● Surface-mounted handle
● U-handle
● T-handle
● Recessed handle (this type is selected in the panel type)
Families with doors:
● Cabinet system
● Swing-door cabinet
● Single swing door
● Double swing door
● Double sliding door
● Triple sliding door
In these families, the handle position is controlled by the “Handle offset” and “Vertical handle offset” parameters.
The handle size is defined by the “Handle Length” parameter.
The handle can be horizontal or vertical.
For single doors, the position is set using numbers from 1 to 9 — analogous to the layout of numbers on a numeric keypad (see the tooltip in the “Handle Position” / “Single Door Handle Position” parameter).
For double and triple doors, the handle position on the panel is specified as follows: 1 — bottom, 2 — middle, 3 — top (see the tooltip in the “Handle Position” parameter).
In families with fronts:
● Dresser
● Drawer
● Pull-out trouser rack
The handle can only be horizontal.
Its position is controlled by the Moving the handle down parameter, and the size is defined by the Handle Length parameter.
Section families are simplified; in them, only the handle length can be specified, without any offset.
Panels
In families
● Pull-out trouser rack
● Drawer
● Double sliding door
● Double swing door
● Single swing door
● Triple sliding door
● Swing-door cabinet
● Cabinet system
● SECTION_3 LEV
● Section Shelf_Crossbar_Dresser
● Section 3 shelves and dresser
● Dresser
the Panel Type can be selected from a drop-down list. The set includes the following panel types:
● Inset panel
● Panel with recessed panel (For single doors, it is possible to choose the recessed handle position: top, bottom, left, or right)
● Milled panel
● Overlay panel
● Standard
For panels of the Recessed panel type, you can set the handle length or select the Full length recessed handle option.
For Inset panel and Milled panel types, the frame width can be adjusted.
4. FAMILIES
Shelf and Corner shelf
These families are available both independently and as part of Furniture Set families:
● Frame system
● Shelves array
● Corner shelves array
● SECTION_3 LEV
● Section_with cubbies
● Section Shelf_Crossbar_Dresser
● Section 1 shelf and crossbar
● Section 2 shelves and crossbars
● Section 3 shelves and dresser
Dimensions and options
For shelves, you can adjust the overall dimensions, the size and offset of the lighting, and specify the shelf material and the lighting material.
Pull-out trouser rack
Dimensions
In the family, you can adjust the overall dimensions and the upward offset of the front. There is a 2 mm gap above the front for model realism.
Options
The following options are provided: Pull out the trouser rack and pull out the trouser rack halfway, toggle the front on or off, and enable/disable the Conventional graphic symbol - Opening.
.
Pull-out basket
Dimensions and options
In the family, you can adjust the overall dimensions. The following options are provided: Pull out the basket and pull out the basket halfway.
Drawer
The Drawer family is used to create individual wardrobe drawers and is part of the Furniture Set families:
● Dresser
● SECTION_3 LEV
● Section Shelf_Crossbar_Dresser
● Section 3 shelves and dresser
Dimensions
In the family, you can specify the overall dimensions, as well as the dimensions of the edges and fronts.
Options
The drawer can be pulled out fully or halfway. There is an option to enable or disable the Conventional graphic symbol - opening.
Storage cubbies
The Storage Cubbies family is used to create storage compartments.
Dimensions, visibility and options
You can enable or disable the following elements:
● Top panel
● Bottom panel
● Left panel
● Right panel
You can specify the number of compartments horizontally and vertically. The minimum number of compartments is 1, and there is no maximum limit.
Pantograph
The Pantograph family is used to place a pantograph with clothes on hangers.
Dimensions
Options and visibility
In the family, you can enable hangers, short or long clothes. The pantograph can be lowered parallel to the floor. Hanger symbol is configured through Manage Panel - Object Styles - Detail Items - INT 03 Wardrobe
Crossbar
The Crossbar family is used to place a clothing rod with hangers and clothes. It is used both as an independent family and within the following families:
● Section 1 shelf and crossbar
● Section 2 shelves and crossbars
● Section 3 shelves and dresser
● Section_with cubbies
● SECTION_3 LEV
Dimensions
Options and visibility
In the family, you can enable top mounting, hangers, and either short or long clothes. The crossbar is available in square or round cross-sections.
Hanger symbol is configured through Manage Panel - Object Styles - Detail Items - INT 03 Wardrobe
Inclined shoe rack
Dimensions and visibility
The family allows adjustment of overall dimensions, elements sizes, andAngle of inclination. You can enable or disable the following elements:
● Upstand
● Backlight
● Heel bar
You can specify the material for the shelf and the backlight.
Straight shoe rack
Dimensions and visibility
The family allows adjustment of overall dimensions and element sizes. The backlight can be enabled or disabled, and a material can be assigned to each element.
Swing-door cabinet
The Swing-Door Cabinet family is used to create cabinets with a single or double door.
Dimensions
In the family you can specify the overall dimensions, panel thickness, and the height of the plinth and legs.Wheels can be selected, with a total height of 60 mm, of which 50 mm is the wheel diameter.
Options and visibility
You can choose a single or double door, or create a cabinet without doors.
You can enable or disable the following elements:
● Top panel
● Bottom panel
● Left panel
● Right panel
● Back panel
● Plinth
● Wheels
● Legs
● Conventional graphic symbol - opening
For the top view, there are two opening options — swing and bi-folding. There is a Panels Extend Forward option. A material can be assigned to each cabinet element.
Swing doors
The set includes two swing door families:
● Single swing door
● Double swing door
Dimensions and options
For the doors, you can specify the width, height, and thickness. A 2 mm gap is provided on the left and right for model realism. It is possible to assign materials to the door panel, frame, and handle. In the top view, both families allow choosing either swing or bi-folding opening.
Sliding doors
The set includes two sliding door families:
● Double sliding door
● Triple sliding door
Dimensions and options
For the doors, you can specify the width, height, and thickness. A 2 mm gap is provided on the left and right for model realism. It is possible to assign materials to the door panel, frame, and handle.
For a triple door, the handle position of the central door can be specified.
Shelves array and Corner shelves array
The families are designed to speed up the workflow and allow multiple shelves to be placed at once.
Dimensions and options
In the family, the following parameters are defined: the number of shelves (from 2), the overall dimensions, and one of the height parameters — either the distance between the shelves or the total height of the array.
Dresser
The family is intended for creating dressers with drawers (from 1 unit).
Dimensions
Visibility and options
The overall dimensions can be specified, as well as the sizes of the drawers, edges, and panels. Three bottom options are provided:
● Plinth
● Wheels
● Legs
The height of the plinth and legs is controlled by the corresponding parameter. The wheels have a diameter of 50 mm and a height of 60 mm. All options can be disabled — in that case, the bottom drawer is placed on the floor.
The following elements can be enabled or disabled:
● Top panel
● Back panel
● Left panel
● Right panel
● Wheels
● Legs
● Plinth
● Conventional graphic symbol - opening
A material can be assigned to each element.
Frame system
The family is intended for creating wardrobe frame systems.
Visibility and options
Dimensions
For each system element, the size and position can be specified. You can either set the total system width (the spacing between the stands will be calculated automatically) or define the spacing between the stands — in that case, the total width will be determined automatically.
The number of sections starts from 1. The following elements can be enabled or disabled:
● Back panel
● Wall mounting
● Shelf backlight
● Top shelf
● Bottom shelf
● Top frame
● Bottom frame
A material can be assigned to each component element.
Cabinet system
The family is used to create modules of the cabinet system.
Dimensions
Options and visibility
The top panel can be made inset to display the cam connector. The following elements can be enabled or disabled:
● Top panel
● Bottom panel
● Left side panel
● Right side panel
● Back panel
● Plinth
● Top backlight
● Left backlight
● Right backlight
You can choose single or double swing doors, as well as sliding doors — double or triple. For a triple door, the handle position of the central door can be specified.
For swing doors, the Bi-folding symbol is available in the plan view. A separate material can be assigned to each module element.
Cabinet system Corner module
The family is intended for creating corner modules in cabinet systems.
Dimensions and options
The top panel can be made inset to display the cam connector. The following elements can be enabled or disabled:
● Top panel
● Bottom panel
● Left panel
● Right panel
● Back panel
● Plinth
Section_with cubbies
The family is designed to speed up workflow and allow simultaneous placement of three shelves, storage cubbies, and a crossbar.
Dimensions, visibility and options
In the family, you can adjust the section dimensions, as well as the size and placement of elements. Materials can be assigned to the elements. The following elements can be enabled or disabled:
● Hangers
● Long clothes
● Short clothes
● Backlight
There is a “Top Mounting” option.
For the storage cubbies, you can set the number of cells horizontally and vertically.
Section 1 shelf and crossbar
The family is designed to speed up workflow and allow simultaneous placement of a shelf and a crossbar.
Dimensions, visibility and options
In the family, you can adjust the section dimensions, as well as the size and placement of elements. Materials can be assigned to the elements. The following elements can be enabled or disabled:
● Hangers
● Long clothes
● Short clothes
● Backlight
There is a “Top Mounting” option.
Section 2 shelves and crossbars
The family is designed to speed up workflow and allow simultaneous placement of two shelves and two crossbars.
Dimensions, visibility and options
In the family, you can adjust the section dimensions, as well as the size and placement of elements. Materials can be assigned to the elements. The following elements can be enabled or disabled for each crossbar and shelf:
● Hangers
● Long clothes
● Short clothes
● Backlight
Each crossbar has a “Top Mounting” option.
Section 3 shelves and dresser
The family is designed to speed up workflow and allow simultaneous placement of three shelves and a dresser.
Dimensions, visibility and options
In the family, you can adjust the section dimensions, as well as the size and placement of elements. Materials can be assigned to the elements. The dresser allows enabling or disabling the Opening symbol, and the shelves’ lighting can be turned on or off. The number of drawers in the dresser can range from 1 to 4.
Section Shelf_Crossbar_Dresser
The family is designed to speed up workflow and allow simultaneous placement of a set consisting of a shelf, a crossbar, and a dresser.
Dimensions, visibility and options
In the family, you can adjust the section dimensions, as well as the size and placement of elements. Materials can be assigned to the elements. The dresser allows enabling or disabling the Opening symbol, and the number of drawers can range from 1 to 4.
The following elements can be enabled or disabled for the crossbar and shelf:
● Hangers
● Long clothes
● Short clothes
● Backlight
The crossbar has a “Top Mounting” option.
SECTION_3 LEV
This is a modular family, which can be used to assemble composite sections.
Dimensions and options
It consists of three levels, and for each level you can choose the following elements:
Levels 1 and 2:
● TROUSER RACK
● SHELF
● EMPTY
● CROSSBAR
● CUBBIES 2x1
● CUBBIES 2x2
● CUBBIES 3x1
● CUBBIES 3x2
● DRAWERS x1
● DRAWERS x2
● DRAWERS x3
● DRAWERS x4
3 level:
● DOOR_2 - Cabinet with double doors
● DOOR_TOP - Cabinet with single doors with upward-opening mechanism
● DOOR_LEFT - Cabinet with single doors with left-opening mechanism
● DOOR_RIGHT - Cabinet with single doors with right-opening mechanism
● SHELF
● EMPTY
● EMPTY_DOOR_2 - Combination of an empty space at the bottom and a cabinet with double doors
● EMPTY_DOOR_TOP - Combination of a lower empty space and a cabinet with double doors
● EMPTY_DOOR_LEFT - Combination of a lower empty space and a cabinet with a single door opening to the left
● EMPTY_DOOR_RIGHT - Combination of a lower empty space and a cabinet with a single door opening to the right
A material, size, and placement height can be specified for each element.
5. STYLING
Graphics settings
To change the color/weight/pattern of family lines, you need to go to Manage - Object Styles - Entourage/Detail Items/Furniture/Lighting Fixtures
