04 Bathroom Revit Families

1. GENERAL INFORMATION

Set name: Bathroom
Version 1.3.0
Revit version: 2019

Description

This set of Revit families is designed for modeling bathroom in Autodesk Revit, suitable for BIM projects in interiors and architecture. The library includes parametric families of plumbing equipment, developed with precise dimensions and requirements for designing bathrooms and laundry rooms.

Using these families, you can create and customize bathtubs, sinks, shower enclosures, shower systems, faucets, towel warmers, plumbing fixtures, and bathroom accessories.

The set is intended for interior designers and architects working in Autodesk Revit on residential and commercial projects.

Loading and placing into the project

In order to view and download the families from the set, you can open Project with Bathroom and copy the families using the Ctrl+C key combination, and then paste them into your project Ctrl+V.

Or open the folder with family files and drag it into the project with the mouse.

2. SET STRUCTURE

Project with bathtubs

The bathroom project includes the following families from folder 4 - Bathtubs:

Built-in bathtub
Freestanding bathtub
Asymmetrical corner bathtub
Corner bathtub

Project with shower enclosure

The shower enclosure project includes the following families from folder 8 - Shower enclosure:

Shower enclosure
Shower door
Shower trap

Project with shower systems

The shower systems project includes the following families from folder 7 - Shower systems:

Shower body spray
Valves
Exposed shower system
Concealed shower system
Hand shower
Shower head

Project with equipment and entourage

The bathroom equipment and decor project includes families from folder 10 - Bathroom equipment and folder 11 - Entourage:

Bathroom equipment:

Water heater round
Water heater
Washing machine
Drying machine

Entourage:

Ironing board
Soap dispenser
Soap dish
Towel on rack
Towel twisted
Towel
Beaker
Laundry dryer

Project with towel warmers

The towel warmers project includes the following families from folder 9 - Towel warmers:

Towel warmer Water One rack
Towel warmer Water
Towel warmer Electric One rack
Towel warmer Electric

Project with sinks

The sinks project includes families from folder 5 - Sinks and folder 13 - Bathroom furniture.

Sinks:

Built-in sink
Wall-Hung sink
Corner sink
Sink

Bathroom furniture:

Base frame for sink

Project with bathroom fixtures

The bathroom fixtures and accessories project includes families from folder 1 - Bathroom fixture and folder 2 - Bathroom accessories.

Bathroom fixture:

Bidet
Hygienic shower 1 outlet
Hygienic shower 2 outlets
Urinal
Floorstanding toilet with barrel
Toilet

Bathroom accessories:

Paper holder
Toilet brush
Mirror
Towel hooks
Floor stand for paper and toilet brush
Shelf corner
Shelf
Towel holder

Project with faucets

The faucets project includes the following families from folder 6 - Faucets:

Faucet classic
Wall-mounted faucet
Faucet

Bathroom components

If necessary, you can use individual components from folder 3 - Bathroom components, which includes the following families:

Bidet installation
Urinal installation
Toilet installation
K
Flush button for urinal
Siphon

3. FAMILIES: PARAMETERS AND ELEMENTS

Outputs symbol

At medium detail level in the top view, you can enable the graphic symbol (GS) for water connections to indicate which pipes need to be routed to this area.

To enable the Graphic symbol, follow these steps:

In the Properties, under the Graphics grouping, check the visibility parameter "Graphic symbol".
Change the view detail level to Medium.

Graphic symbol display in the top view depends on which systems are enabled in the Graphics parameters within the parent family for Graphic symbol, as well as the "Vertical placement" parameter.

Graphic Symbols by system type:

Blue - Cold water
Red - Hot water
Green - Drain

In the front view, Outputs symbol in families are shown as circular markers with centerlines.

Marker colors also indicate the system type.

Graphic symbol display depends on enabled system type parameters and the "Vertical placement" parameter.

Graphic Symbol Outputs. General Dimensions

In the Graphic symbol subgroup under the Dimensions grouping, parameters control the size and position of the graphic symbol relative to elements in the parent family.

Graphic Symbol parameters found in families:

GS_CW and HW height: Cold and Hot water outlet height
GS_Drain height: Drain outlet height
GS_CW and HW diameter: Graphic Symbol cold/hot water circle diameter
GS_Drain diameter: Graphic symbol drain circle diameter
Axis displacement CW: Cold Water outlet offset (or cold/hot Water) from drain

Connectors

Some families include connectors to cold water, hot water, and drainage.

Connector dimensions can be specified using the following parameters:

Connector CW diameter
Connector CW and HW diameter
Connector Drain diameter

Bathtubs

Built-in bathtub

Here you can on/off the following elements:

Bath panel
Legs

Dimensions

“INT_Width”, “INT_Depth”, and “INT_Height” parameters control the overall dimensions of the bathtubs.

"Legs forward-backward shift": Distance of legs from the edge along the short side.

"Legs lateral shift": Distance of legs from the edge along the long side of the bathtub.

"Bowl height": Distance from the bathtub bottom to the rim edge. Adjusted by leg height.

"Edge width": Width from the inner bowl edge to the outer bathtub edge.

Options

Bathtub shape options:

Bathtub shape rectangular

○Bowl oval

○Bowl rectangle

Bathtub shape oval
Bathtub shape semi-oval
Bathtub shape semi-oval corner bathtub

Drain placement:

Drainage side placement
Drainage center placement

Graphic symbol placement:

Graphic symbol_Side placement
Graphic symbol_Center placement

Corner bathtub

Here you can turn on/off the Bath panel.

You can also select graphic symbol placement:

Graphic symbol_Left Placement
Graphic symbol_Right Placement

Dimensions

In the corner bathtub, the "INT_Width" and "INT_Height" dimensions change. The "INT_Depth" parameter equals "INT_Width".

You can control element sizes: "Bowl height" and "Rim height".

Asymmetrical corner bathtub

Here you can turn on/off the Bath panel.

You can also select graphic symbol placement:

Graphic symbol_Left Placement
Graphic symbol_Right Placement

Dimensions

In the asymmetrical corner bathtub, the "INT_Width" and "INT_Height" dimensions change. The "INT_Depth" parameter equals "INT_Width".

You can control the sizes of elements: “Bathtub rectangular_Right side” (Rectangular bathtub only), “Bowl height” and “Edge height”.

Options

Bathtub shape

Bathtub round
Bathtub rectangular

Freestanding bathtub

Bathtub shape options:

Bathtub shape rectangular

○Bowl oval

○Bowl rectangle

Bathtub shape oval
Bathtub shape classic
Bathtub shape semi-oval
Bathtub shape egg

Dimensions

All dimensions change for rectangular, oval, and semi-oval bathtubs.

You can modify the following element sizes:

Bowl height
Edge width

Bathtub shape features:

Bathtub shape classic: only "INT_Width" changes
Bathtub shape egg: only "INT_Height" changes

Options

Drain position:

Drainage side placement
Drainage center placement

Bathtub shape features:

For classic bathtub shape and egg-shaped bathtub, drain position does not change.

Shower enclosures

Shower enclosure

Here you can on/off the following elements:

Base
Base edge
Enclosure

Dimensions

The "INT_Width", "INT_Depth", and "INT_Height" dimensions can be modified.

You can also change element sizes for enclosure height, base height, and door width.

Options

Graphic symbol:

Graphic symbol (Medium detail level)
Graphic symbol_Opening
Graphic symbol_Trap

Graphic symbol placement

Graphic symbol right
Graphic symbol left

If a sliding door is selected, the Graphic symbol_Opening displays as an arrow and includes additional options.

Placement outside
Placement inside

In the options, you can select the enclosure and base shape:

Shape rectangular
Shape quarter-circle
Shape pentagon

Enclosure placement type:

E_Placement corner
E_Placement in niche
E_Placement in niche with 1 side glass
E_Placement in niche with 2 side glasses
E_Placement wall-mounted
E_Placement against wall

Door type selection

E_Type swing door
E_Type sliding door
E_Quantity one door
E_Quantity two doors

Door opening type

Opening left-hand
Opening right-hand

Drain type selection:

D_Shape round
D_Shape square
D_Shape rectangle

You can also select the drain placement variant on the base.

For round and square drains:

D_Type top left
D_Type top center
D_Type top right
D_Type left center
D_Type bottom left
D_Type bottom center
D_Type bottom right

The rectangular drain can be positioned on three sides of the tray: top, left, and bottom.

Materials

Materials for the enclosure frame, glass, base, handle, mounting, and drain can be changed.

Shower door

Here you can on/off the following elements:

Wall mounting 90°
Wall mounting 45°
Unframed
Frame

Dimensions

The “INT_Width” and “INT_Height” dimensions can be modified.

Using the “Mounting setback from the wall” parameter, you can set the partition offset from the wall.

Shower trap

Trap shape:

Shape rectangular
Shape round

For the shower trap, you can on/off the Graphic symbol:

Graphic symbol_Trap
Graphic symbol (Shower trap)*
Graphic symbol (Wall trap)**

*If the trap is placed in the base/floor, enable Graphic symbol (Shower trap).

**If the trap is placed in the wall, enable Graphic symbol (Wall trap) for correct top and front symbolic display.

Dimensions

The "INT_Width", "INT_Depth", and "INT_Height" dimensions can be modified.

You can also adjust the sewer connection pipe diameter and connection depth.

Shower systems

Shower body spray

Shower shape options:

Shape square
Shape round

The "INT_Width", "INT_Depth", and "INT_Height" dimensions can be modified.

Valves

Here you can on/off the following elements:

Valve 1
Valve 2
Valve 3
Valve 4
Valve 5
Hand shower on the base
Base

Dimensions

The "Valves distance between axes" parameter sets the distance between the centers (axes) of the valves and the hand shower (if the hand shower option is enabled).

For rectangular valves, you can modify the "Valves width" and "Valves height" parameters.

For round valves: "Valves height" = "Valves width".

The "Plugs diameter" parameter is available for adjustment only when the “Valve on the base” is enabled and the “Base” is disabled.

The "Frame" parameter adjusts the offset from the edge of the base to the edge of the valve.

Options

Valve placement options

Valves type vertical
Valves type horizontal

Valve shape options

Valves shape round
Valves shape rectangular

Base shape is set independently of the valves:

Base shape rectangular
Base shape oval
Base shape round

For the hand shower (when the "Hand shower on the base" parameter is enabled), shape selection is available:

Hand shower shape cylinder
Hand shower shape rectangle
Hand shower shape round

Hose type options:

Hose type bathtub
Hose type shower

Materials

Valve Family Materials:

Material for valves
Material for base
Material for plugs
Material for hand shower
Material for hose

Exposed shower system

Here you can on/off the following elements:

Shower head
Hand shower
Spout

Dimensions

Hand shower parameters are active only when the "Hand shower" parameter is enabled.

Main placement and size parameters for shower elements:

SH_Height of placement
SH_Distance from the wall
SH_Width

Thermostat and showerhead position

Hand shower height placement
Hand shower offset
Thermostat height placement

“Rod height” parameter is active only when “H_Positioning on rod” is enabled.

“Hand shower offset” and “Hand shower height placement” parameters are inactive when “H_Positioning on rack” is enabled.

Options

In the Exposed shower system family, Shower head and Hand shower options are available.

For the shower head (when "Shower head" parameter is enabled), shape selection is available:

SH_Shape round
SH_Shape square

For the Hand shower (when the "Hand shower" parameter is enabled), shape selection is available:

H_Shape cylinder
H_Shape rectangle
H_Shape round

Materials

Exposed shower system materials:

Material for SH,thermostat,spout
Material for hand shower
Material for hose
Material for plugs
Material for rod

Concealed shower system

Here you can on/off the following elements:

Shower head
Valve 1
Valve 2
Valve 3
Valve 4
Valve 5
Hand shower
Vents base

Dimensions

In the concealed-mounted shower system family, placement and size parameters are available.

For the shower head (when the "(SH) Shower head" parameter is enabled):

SH_Height of placement
SH_Distance from the wall
SH_Thickness
SH_Width
SH_Height of pipe

For the hand shower (when the "Hand shower" parameter is enabled):

H_Height placement
H_Offset
H_Connection offset
H_Height connection
Rod height
Plugs diameter (For hand shower and valves)

For valves:

V_Height placement
V_Offset
V_Distance between axes
Valves width
Valves height
Plugs diameter (For hand shower and valves)
Frame

Options

In the Concealed shower system family, options are available for the hand shower, shower head, and valves.

Hand shower options:

Shape selection is available (independent of mounting type):

H_Shape cylinder
H_Shape rectangle
H_Shape round

Mounting type is selected separately:

H_Mounting 1
H_Mounting 2
H_Mounting 3
H_Mounting 4 on base

For "H_Mounting 2" and "H_Mounting 4 on base", hose type selection is additionally available:

Hose type bathtub
Hose type shower

Detailed (SH) Shower head options are covered in the Shower head section.

(V) Valves options are detailed in the Valves section.

Materials

Concealed shower system materials:

Material for SH
Material for hand shower
Material for hose
Material for valves
Material for plugs
Material for base
Material for rod

Hand shower

Hand shower shape options (independent of mounting type):

Hand shower shape cylinder
Hand shower shape rectangle
Hand shower shape round

Mounting type:

Hand shower attachment 1
Hand shower attachment 2
Hand shower attachment 3

For "Hand shower attachment 1", hose type selection is additionally available:

Hose type bathtub
Shower type hose

Dimensions

Hand shower offset
Offset of the shower head (from 0 to any value) is available only for attachment 1 and attachment 3.
Hand shower height placement
The distance of the shower head from the placement plane is always available.
Hand shower connection height
Connection distance from the placement plane is available only for attachment 1 and attachment 3.
Plugs diameter
Diameter of all plugs for the selected mounting type is always available.
Rod height
Distance between rod mountings is available only for attachment 3.

Materials

Hand shower materials:

Material for hand shower
Material for hose
Material for plugs
Material for rod

Shower head

Placement type:

SH_1 type from wall
SH_2 type from ceiling
SH_3 type in ceiling

Shower shape:

SH_Shape round
SH_Shape square

Dimensions

Shower head family parameters: SH_Height of placement and SH_Height of pipe, SH_Distance from the wall, width and thickness, as well as plug diameter.

Equipment and entourage

Water heaters

The set includes two types of water heaters: rectangular and round shapes.

Placement height is adjusted using the “Offset” tool.

Dimensions are changed with parameters "INT_Width", "INT_Depth", and "INT_Height".

For the round water heater, "INT_Depth" equals "INT_Width".

Washer and dryer

For the Washing machine, you can on/off the following elements:

Drying machine top
Graphic symbol_Opening

For the Drying machine

Graphic symbol
Graphic symbol Top
Graphic symbol_Opening

Dimensions

Dimensions are changed with parameters "INT_Width", "INT_Depth", and "INT_Height".

The placement parameter "Drying machine setback" can be changed - distance between washer and dryer.

Entourage

Soap dispenser

In the family, you can turn on/off the holder.

5 types of dispensers are selected by visibility checkboxes.

Soap dish

For the soap dish, you can turn on/off the holder and select the shape: rectangular or round.

The wall offset dimension and plug width values can be changed.

Beaker

For the beaker, you can turn on/off the holder and select the shape: square or round.

The number of beakers in the type can be selected: 1 or 2.

Towels:

Overall dimensions can be changed.

Ironing board family offers the following display options:

Unfolded
Folded

The Laundry dryer rack family has only one display option.

Towel warmers

Water and electric towel warmers, One rack

Here you can on/off the following elements:

Connection
Plug

Vertical profile section options:

VP_Section square
VP_Section circle

Dimensions

Dimensions are controlled by parameters "INT_Height" and "INT_Depth".

Parameter "Connection height" sets the distance from the start of the vertical profile to the connection point.

Parameter "Mounting offset vertically" sets the distance from the profile start to the mounting center.

Towel warmers

Here you can on/off the following elements:

Vertical racks
Frame
Shelf
Connection
Plug

Dimensions

Dimensions are controlled by parameters "INT_Height", "INT_Depth", "INT_Height".

Parameter "Mounting offset vertically" sets the distance from the profile start to the mounting center.

Parameter "HP vertical offset" sets the distance from the profile start to the edge of the horizontal profile.

*Parameter "Connection height" is available only in the water Towel warmer family. It sets the distance from the vertical profile start to the connection point.

Options

Vertical profile options are available in the towel warmer family.

With "Vertical stands" parameter enabled, placement options can be selected:

VP_Placement standard
VP_Placement nearby

Vertical profiles Section options:

VP_Section square
VP_Section circle

Horizontal profile options are available in the towel warmer family.

Horizontal Profiles Section options:

HP_Section square
HP_Section circle
HP_Section rectangle

Placement relative to the vertical profile:

HP_Placement between verticals
HP_Placement in front

Horizontal profile grouping:

HP_Group
HP_Freestanding

Water towel warmer, connection placement options:

C_Top
C_Bottom
C_On the rack
C_Diagonal

Sinks

Common elements

Drainage

By default, round drain is applied to all sinks.

Drain selection is available only for rectangular sink (and if in the "Built-in sink" family the "Placement in line with the countertop" parameter is selected):

Drainage round
Drainage rectangular
Drainage slotted

Faucet

Faucet placement options:

F_Placement on the plane
F_Placement on the sink
F_Wall-mounted placement

For the built-in sink, option "F_Placement on the sink" is available only with "Placement on a countertop".

Dimensions

Dimensions are controlled by parameters "INT_Width" and "INT_Depth".

Parameter "Faucet offset from the sink" controls the distance from the faucet axis to the sink edge only for options "F_Placement on the plane" and "F_Wall-mounted placement".

*Important: In the sink family, the parameter "Edge width" is named "Edge thickness".

Dimensions are controlled by the parameter "INT_Height".

Parameter "Wall-mounted faucet vertical shift" - distance from sink top to faucet axis (available when "Faucet" parameter is enabled and "F_Wall-mounted placement" option is selected).

Parameter "Siphon offset downward from the sink" - distance from sink top to siphon horizontal axis.

Parameter "Siphon offset to the wall" - distance from wall surface to siphon vertical axis.

Siphon placement parameters are available when "Siphon" parameter is enabled.

Pedestal dimensions

For Wall-hung sink and Corner sink, pedestal dimensions can be changed.

Parameter "Pedestal height" sets the vertical dimension from the top sink connection point to the pedestal base.

Parameter "Pedestal width from top (Pedestal top depth)" sets the width (depth) of the pedestal at the top (sink connection area).

"Pedestal width from bottom (Pedestal depth from below)" sets the width (depth) of the pedestal at the bottom (base).

These parameters create the pedestal's trapezoidal geometry.

Built-in sink

Here you can on/off the following elements:

Faucet
Faucet shelf
Siphon

Faucet shelf is available only when "Placement on a countertop" option is enabled

Dimensions

Parameter "INT_Height" controls the main dimension (Edge are not included in the main dimension).

Parameter "Edge height" is available only when "Placement on a countertop" option is enabled.

Important: Parameter "Siphon offset downward from the sink" is always measured from the main sink dimension without "Edge height".

For more details on built-in sink dimension parameters, see "Common elements" section, Dimensions subsection.

Options

Placement options:

Placement under the countertop
Placement on a countertop
Placement in line with the countertop

Sink shape options:

Shape rectangular
Shape oval
Shape round
Shape ellipse

Sink shape rounding can be set for all shapes except "Shape ellipse".

See other options in section “Common elements”.

Sink

Here you can on/off the following elements:

Faucet
Faucet shelf
Siphon
Siphon rotation

See other options in section “Common elements”.

Dimensions

Parameter "Shelf height" is available only when "Faucet shelf" parameter is enabled. It sets the distance from sink bottom to shelf top.

Height placement is done using the "Offset" tool in the Constraints group.

For more details on sink dimension parameters, see "Common elements" section, Dimensions subsection.

Options

Sink shape options:

Shape rectangular
Shape oval
Shape round
Shape bowl

Sink shape rounding can be set for the following sink shapes:

Shape oval
Shape round

Parameter "INT_Height" allows floor placement of the sink, setting the total height from base to edge top (for floor mounting).

See other options in section “Common elements”.

Wall-Hung sink

Here you can on/off the following elements:

Faucet
Pedestal
Siphon

Dimensions

Parameters "INT_Width", "INT_Depth", and "INT_Height" control the overall family dimensions.

There are gray parameters that cannot be controlled. But they are needed to understand size calculations. For example, INT_Height shows the sink height. When pedestal is enabled, it automatically combines pedestal height and sink height itself.

For more details on pedestal dimension parameters, see "Common elements" section, Pedestal dimensions subsection.

Corner sink

Here you can on/off the following elements:

Faucet
Pedestal
Siphon

Siphon placement options:

Siphon on the left wall
Siphon on the right wall

Dimensions

Parameters "INT_Width", "INT_Depth", and "INT_Height" control the overall family dimensions.

For more details on pedestal dimension parameters, see "Common elements" section, Pedestal dimensions subsection.

Base frame for sink

Here you can on/off the following elements:

Countertop
Railing
Shelves
Base
Drawer

Dimensions

Parameters "INT_Width", "INT_Depth", and "INT_Height" control the overall family dimensions.

Parameter "INT_Height" is a height parameter that includes other element heights when enabled (Countertop thickness, Drawer height, Lower shelf offset).

Options

Options:

Shelves quantity 2
Drawer placement under frame
Closed base
Side rails

Option "Shelves quantity 2" adds a second shelf (available only when "Shelves" parameter is enabled).

Option "Drawer placement under frame" lowers the drawer to the frame base level (available only when "Drawer" parameter is enabled).

Option "Closed base" adds a horizontal profile at the base along the long side (available only when "Base" parameter is enabled).

Option "Side rails" disables railing between vertical profiles along the frame's long side (available only when "Railing" parameter is enabled).

Bathroom fixtures and Accessories

Bathroom fixture

Toilet

The toilet family has 2 types: Floor-standing toilet and Wall-hung toilet.

Here you can on/off the following elements:

Key
Seat
Installation

You can choose the type:

Type 1
Type 2

You can select the key type from the toilet family's dropdown menu:

Key with two square buttons
Key with two round intersecting buttons
Key with one round button

Dimensions

The parameters "INT_Width", "INT_Depth", and "INT_Height" control the toilet's overall dimensions.

There are gray parameters that cannot be controlled. But they are needed to understand the size calculations. For example, INT_Height depends on the "Seat height" parameter.

Adjust key sizes using "Key large side", "Key smaller side", and "Key depth".

Change seat height relative to finished floor level using "Seat height".

Control key height with "Distance from the floor to the center of the key".

Installation

For the Installation, you can adjust dimensions with "Installation width", "Installation depth", and "Installation height".

"Cladding thickness": Distance from carrier to toilet covered by drywall.

Materials

You can change materials for the toilet, installation, key, and seat.

Floorstanding toilet with barrel

Here you can on/off the following elements:

Seat

You can choose the type:

Type 1
Type 2

Dimensions

The parameters "INT_Width", "INT_Depth", and "INT_Height" control the toilet dimensions.

You can adjust the seat height relative to the finished floor level using the "Seat height" parameter.

Bidet

The bidet family has 2 types: Floor bidet and Wall-hung bidet.

Here you can on/off the following elements

Installation

You can choose the type:

Type 1
Type 2

Dimensions

The parameters "INT_Width", "INT_Depth", and "INT_Height" control the bidet's overall dimensions.

There are gray parameters that cannot be controlled. But they are needed to understand the size calculations. For example, INT_Height. It equals the "Seat height" parameter.

You can adjust the bidet seat height using the "Seat height" parameter.

Installation

For the Installation, you can adjust dimensions with "Installation width", "Installation depth", and "Installation height".

“Lining thickness”: Distance from bidet to Installation covered by drywall.

Urinal

Here you can on/off the following elements:

Flush key
Button on the flush key
Installation

Dimensions

The parameters "INT_Width", "INT_Depth", and "INT_Height" control the urinal's overall dimensions.

Adjust flush key size using "Key width", "Key depth", and "Key height". You can also change key height with "Distance from the floor to the center of the key".

The "Urinal depth of straight section" parameter adjusts the distance from the wall to the urinal's drain on the straight section.

The "Distance from floor to top" parameter sets the urinal height above finished floor level.

Installation

For the Installation, you can adjust dimensions with "Installation width", "Installation depth", and "Installation height".

“Lining thickness”: Distance from urinal to Installation covered by drywall.

Hygienic shower 1 outlet

Added option to toggle Graphic symbol visibility:

Graphic symbol CW HW
Graphic symbol CW

Dimensions

Height placement is done using the "Offset" tool in the Constraints group.

Hose length is adjusted using the "Hose length" parameter.

Hygienic shower 2 outlets

For the hygienic shower 2 outlets, you can toggle Graphic symbol visibility on/off.

Dimensions

Height placement is done using the "Offset" tool in the Constraints group.

Hose length is adjusted using the "Length hose" parameter.

You can modify the Distance between CW and HW pipes.

Accessories

Mirror

Here you can on/off the following elements:

Frame
Backlighting on the mirror
Backlighting behind the mirror

Dimensions

Adjust dimensions using "INT_Width", "INT_Depth", and "INT_Height".

Modify element sizes: "R frame" for the rectangular beveled mirror, "Indentation of the backlight from the edge of the mirror", "Width backlight line", "Frame width", and "Frame depth".

Position and adjust mirror height using the Offset tool.

Options

You can change the mirror shape:

Rectangular
Rectangular with chamfer
Rоund
Oval

Towel holder

For all towel holders, you can toggle the stub on/off and change its shape:

Stub round
Stub square

You can select the towel holder type:

Single boom
U-shaped boom
Swivel
Ring

For Single boom and U-shaped boom towel holders, you can change the boom shape:

Boom shape circle
Boom shape square

For U-shaped boom, you can select Number of rungs:

1 pc.
2 pc.

For the Swivel towel holder, you can select the Number of rungs from 1 to 4 using the "Number of rungs" parameter.

Dimensions

Only for the Swivel towel holder can the following parameters be adjusted:

Angle of rotation 1: Angle of rotation for the bottom first boom.
Angle of rotation 2: Angle of rotation for subsequent boom.
Swivel height: Distance between stub mountings.

Only for the ring-shaped towel holder can the following be adjusted:

Ring diameter

For all towel holders, the following parameters can be adjusted:

Boom width
Boom depth
Boom thickness

For all towel holders with stubs enabled, the following can be adjusted:

Stub width
Stub thickness

Towel hooks

For hooks, you can toggle the stub on/off and select its shape:

Stub rectangular
Stub oval
Stub round

The number of hooks on a single base can be selected using the "Number of hooks" parameter.

The hook shape can also be specified:

1.Button
2.L-shaped
3.L-shaped double
4.Slanted
5.Cylinder
6.Square

Dimensions

The following parameters can be adjusted in the family:

Shift from the edge of the stub
Hooks depth
Stub width
Stub height
Stub thickness

Floor stand for paper and toilet brush, Toilet brush and Paper holder

The toilet brush family can be placed on the wall or floor.

For the toilet brush and paper families, placement and height adjustment are set using the Offset tool.

Bathroom Shelves

You can select the shelf family type.

The corner shelf family includes options to toggle the edge on/off and adjust the number of shelves.

Dimensions

Shelves are positioned and adjusted in height using the Offset tool.

For shelf family:

Adjust dimensions: "INT_Width", "INT_Depth", "INT_Height".

Modify shelf thickness.

For corner shelf family:

Adjust dimension: "INT_Width".

Modify element sizes: shelf height, edge height, and edge thickness.

Faucets

Faucet

Here you can on/off the following elements:

Valve 1
Valve 2
Valve 3
Valve left
Hand shower
Valve on the faucet
Lever on the valve
Base

Combination Variants

Graphics group parameters let you flexibly control the faucet's composition and appearance by toggling individual family elements on/off.

Combine visibility parameters to create different faucet types within one family.

For the first combination, the following visibility parameters are enabled:

Valve 1
Valve left
Hand shower
Base

For the second combination, the following visibility parameters are enabled:

Valve on the faucet
Lever on the valve
Base

Dimensions

The parameters "INT_Width", "INT_Depth", and "INT_Height" control the faucet's overall dimensions.

There are gray parameters that cannot be controlled. But they are needed to understand the size calculations. For example, INT_Width. The parameter shows the faucet width, as it is calculated by a formula based on the number of valves, presence of the hand shower, and the distance between axes.

Options

Spout, hand shower, base valve, and base options are available in the faucet family.

Spout shape options:

Spout 1 shape
Spout 2 shape
Spout 3 shape

When the "Hand shower" parameter is enabled, the following options are available:

Hand shower placement options:

Hand shower on base
Hand shower on faucet

Hand shower shape options:

Hand shower shape cylinder
Hand shower shape round
Hand shower shape rectangle

When the "Valve on the faucet" parameter is enabled, the following faucet body shape options are available:

Single-lever
2x cross

When the "Base" parameter is enabled, the following base shape options are available:

Base shape rectangular
Base shape oval

Wall-mounted faucet

Here you can on/off the following elements:

Valve 1
Valve 2
Valve 3
Valve left
Hand shower
Base

Dimensions

The parameters "INT_Width", "INT_Depth", and "INT_Height" control the faucet's overall dimensions.

Options

In the faucet family, options are available for the hand shower, hose type, and base.

When the "Hand shower" parameter is enabled, the following are available:

Hand shower shape selection:

Hand shower shape cylinder
Hand shower shape round
Hand shower shape rectangle

Hose type:

Hose type bathtub
Hose type shower

When the "Base" parameter is enabled, the following faucet body shape options are available:

Base shape rectangular
Base shape oval

Faucet classic

Faucet type options:

1 type on edge
2 type floor standing
3 type wall-mounted

Dimensions

The "Height of placement" parameter is available only for faucets when the "2 type floor standing" parameter is enabled. For "1 type on edge" and "3 type wall-mounted" faucets, height can be adjusted using the "Offset" tool in the Revit project.

The "Distance between axes" parameter sets the distance between valve axes and works for all faucet types.

4. GRAPHICS

Graphics settings

To change the color, weight, or line type of family elements, go to Manage > Object Styles > Categories:

Entourage
Furniture
Generic Models
Mechanical Equipment
Plumbing Fixtures

Go to purchase